Care

ALKOWN Mirror Care

The ALKOWN Mirror Cleanable First Surface Spherical Mirror is the first spherical full dome mirror that can be cleaned using light pressure and gentle solvents. ALKOWN Mirror takes advantage of proprietary manufacturing methods to create a surface that is more durable than other fulldome mirrors, and that sheds dust and repels water. With proper care and damage prevention the reflective surface will stay operational for years.

Prevention First:

This optical mirror- like all optical mirrors- must be handled with care to ensure the longest possible service life. The mirror coating is on the front surface- unlike common mirrors- and thus is more vulnerable to damage.

Prevention is always the first line of defense- it is best to avoid introducing foreign material to the mirror surface in the first place- particularly body fluids such as perspiration or saliva, or oils such as from fingers and hands, any other sort of oil or grease, as well as any sort of dirt or dust.

To accomplish this, avoid touching the metalized dome surface at all. At a minimum wear latex or vinyl gloves when handling to avoid leaving fingerprints. Whenever possible wear soft cotton or nylon gloves over the latex or vinyl ones. Turn your head to avoid talking over the mirror or wear a nose and mouth mask.

Also, although the ALKOWN Mirror coating is more durable than other front surface mirrors, the acrylic material itself is relatively soft- therefore it is important to avoid abrasive contact with any object- the plastic will easily (and permanently) scratch. This includes most cloth, paper towels, etc.

Cleaning:

If foreign material does come in contact with the ALKOWN Mirror, it may be carefully cleaned as described below. Note that caution and discretion should always be exercised- as not all instances of foreign material on the mirror surface translate into noticeable defects in projected images- and thus the desire to clean needs to be balanced against risk of damage.

The best strategy is to use the least invasive method possible that gets the job done. Also, always first remove any particulate using one of the more gentle methods before applying any method that involves rubbing. Please refer to the following list of cleaning methods- sorted generally from lower risk to higher risk:

1. Compressed air- use a source designed for optics, such as aerosol cans sold by professional photographic suppliers. Loose particles and dust can often be successfully removed using this method alone. Warning: Sources such as air compressors must be filtered with traps that prevent water condensation from being sprayed out with the air.

2. Soft anti-static brush- use one designed for optics, such as sold by professional photographic suppliers. Sweep gently, taking care to not let the hard parts of the brush contact the mirror surface. Used with care this method can be quite effective for removing loose particles and dust.

Know More

ALKOWN Dome-7

ALKOWN is a preeminent manufacturer of portable dome theatres and the mirror- projection equipment that these theatres...

Spherical Projection System

The Spherical Projection Device uses two first-surface mirrors: a curved mirror and a flat mirror. In the Spherical Projection...

ALKOWN Mirror

ALKOWN Mirror provides a scratch resistant, dust-repelling primary convex mirror for its Spherical Projection System (and for other...